Chapter I: Introduction : ViewPlus InkConnect for Tiger Elite and Premier Embossers

ViewPlus InkConnect for Tiger Elite and Premier Embossers

Print View
Table of Contents
I. Introduction
	-	Preface
	-	FCC Compliance Statement
	-	Safety Instructions
	-	Specifications
II. Installation
	-	Items in the Box
	-	Unpacking
	-	Hardware Attachment
	-	Software Installation
	-	Ink Cartridge Installation
III. Set Defaults for the Printer
	-	Windows Printer Defaults
	-	Legacy Printer Defaults
	-	Service Settings
IV. Braille, Translation and Printing
	-	ViewPlus Tiger Software Suite
	-	Fonts
	-	Math and Braille
	-	Printing
V. Support, Maintenance and Warranty
	-	Training and Support Packages
	-	Maintenance
	-	Warranty

Chapter I: Introduction

Preface

ViewPlus InkConnect

For your Elite or Premier embosser

User's Manual

Congratulations on owning a ViewPlus InkConnect! This HP Inkjet attachment for your Elite or Premier embosser allows you to easily add ink to all your tactile documents. This manual will introduce you to the basic information regarding your new ink attachment. The ViewPlus web site is another resource for information on your ViewPlus product including examples, tutorials and other useful downloads.

Visit the website at: http://www.viewplus.com

Model Number VPT9034-00

User's Manual

FCC Compliance Statement

Compliance Statement (USA)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Compliance Statement (Canada)

This digital apparatus is in conformity with standard NMB-003 of Canada.

Cet appareil numérique est conforme à la norme NMB-003 du Canada.

Compliance Statement (Germany)

Bescheinigung des Herstellers/Importeurs:

Hiermit wird bescheinigt, dass der Drucker der Maschinenlärminformationsverordnung 3. GSGV, 18.01.1991 entspricht: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß EN27779-1991.

Compliance Statement (Europe)

Warning: This product meets the interference requirements of EN55022. In a domestic environment, this product may cause radio interference in which case, the user may be required to take adequate measures.

Compliance Statement (Korea)

This apparatus complies with CISPR22 requirements.

International Compliance

EN55022:2006 Emissions series

EN55024:1998 Immunity characteristics

EN61000-3-2:2006 Power line harmonics

EN61000-3-3:1995 Power line flicker

EN55024:1998 Electrostatic discharge

EN55024:1998 Radiated susceptibility

EN55024:1998 Electrical fast transient/burst

EN55024:1998 Surge

EN55024:1998 Conducted immunity

EN55024:1998 Input voltage interruptions/DIPS

Waste Electrical and Electronic Equipment (WEEE) Compliance

ViewPlus BV complies with EU Directive 2002/96 regarding WEEE recycling; upon the conclusion of the product lifecycle, please contact ViewPlus BV concerning proper disposal.

Safety Instructions

Read all the following safety instructions before using the ViewPlus InkConnect for your Tiger Elite or Premier embosser. In addition, always follow all warnings and instructions marked on the printer itself. All safety instructions listed in your Tiger Elite and Premier series embosser manual continue to apply.

Do not place printer with ink attachment on an unstable surface.
Do not place printer with ink attachment near a radiator or heat source.
Do not block or cover slots and openings in the printer's cabinet; do not insert objects through slots.
Use only the type of power source indicated on printer's label.
Connect all equipment to properly grounded electrical outlets.
Do not connect the ink attachment to any external power supply.
Do not use frayed or damaged power cord.
The use of an extension cord with the printer is not recommended.
Detach printer from power during the ink attachment installation or removal process.
Unplug printer before cleaning it; always clean it with a piece of damp cloth only.
Do not spill liquid into printer or the ink attachment.
Except as specifically explained in the user's manual, do not attempt to service the printer by yourself.
Detach the printer from power source and refer to qualified service personnel under the following conditions:

If the power cord or plug is damaged.
If liquid has entered the printer or the ink attachment.
If printer or ink attachment have been dropped or the cabinet is damaged.
If the printer or ink attachment do not operate properly or exhibit a distinct change in performance.

Only adjust those controls that are covered by the operating instructions.

Specifications

	ViewPlus InkConnect for Tiger Elite and Premier Embossers
Character Sets	Use any font at any size
Print Resolution	100 dots per inch
Print Speed	up to 110 combined print and braille characters per second in draft mode (actual speed depends on embosser model)
Print Mechanism	Uses two HP C6602A cartridges, capacity: 15mg of ink, equals approx. 7 million characters
Paper Feed Method	Tractor feed only
Paper Size	Any tractor-fed braille or office paper 4-12 inches wide
Paper Weight	Any weight from thin computer paper (starting at 75 g/m²) to thick card stock, photo paper or braille paper (up to 230 g/m²)
Dimensions Length Width Height Weight	8.2 inches (20.9 cm) 22.3 inches (56.7 cm) 10.0 inches (25.4 cm) 14 pounds (6.35 kg)
Connectivity	USB or LAN connection through Tiger Elite or Premier embosser
Power Consumption	Standby < 0.5 W Average Print 90 mA @ 5 V, 300 mA @ 42 V
Computer Requirements Operating System Memory	Windows XP or later 256 MB or more
Embosser Requirements Embosser type Firmware	ViewPlus Elite or Premier embosser (if your embosser serial number is lower than CEL2000100 for Elite 200, CEL1500100 for Elite 150, CPM1000100 for Premier 100 or CPM0800100 for Premier 80, please contact ViewPlus Technologies for information on upgrading your hardware) Version 1.6.0 or later (if your embosser serial number is lower than CEL2000100 for Elite 200, CEL1500100 for Elite 150, CPM1000100 for Premier 100 or CPM0800100 for Premier 80, please contact ViewPlus Technologies for a free firmware upgrade)